All Steel NW Materials

 

All Steel NW Metal Hot Dipped Galvanized Steel

Hot Dipped Galvanized Steel

All of our materials used are 100% galvanized

  • 14 gauge (2.5″ square tubing)
  • 12 gauge (2.25″ square tubing)
All Steel NW Metal Base rail

Base rail

The base rail is the foundation of the building, each welded sleeve is approximately 4ft apart center to center.

All Steel NW Metal Trusses/Bows

Trusses/Bows

Vary from sizes of 12 feet wide up to 60 feet wide.

All Steel NW Metal Sheet Panels

Sheet Panels

They are 29 gauge in thickness. Our longest single panel is 31′ long.

All Steel NW Metal Walk-in Doors

Walk-in Doors

34″ width and 72″ height

All Steel NW Metal Windows

Windows

30″ width x 30″ height

All Steel NW Metal Standard Anchors

Standard Anchors

All buildings anchored to ground come with pin anchors
unless building is being anchored down on concrete.

All Steel NW Metal Additional Anchoring

Asphalt Anchoring

These are used for Asphalt anchoring when needed.

All Steel NW Metal Additional Anchoring

Mobile Home Anchor with Loop

Mobile Home Anchor with Loop.

All Steel NW Metal Braces

Braces

These 18 gauge braces are used for center bracing and corner bracing. (2′, 3′, 4′ lengths depending on height of building)

All Steel NW Metal Purlins / Hat Channel

Purlins / Hat Channel

Frame piece on A-frame Vertical roof that runs horizontal so sheet panels can be attached.

All Steel NW Metal Vapor Barrier

R15 Reflective Insulation | Vapor Barrier

  1. Reflective Insulation (R-V 15.67)
  2. ICC-ES Recognized and energy star qualified
  3. More tear resistant than foam interior
  4. Works in temperatures as extreme – 20 Degrees Celsius and as high as 80 degrees Celsius, if an airspace is added it can go up to 300 degrees Celsius
  5. No Asbestos
All Steel NW Metal Roll-up Doors

Overhead Garage Door

All Steel NW Metal Roll-up Doors

Garage Roll-up Doors

  • Residential Sizes:
    6×6 – 250.00
    6×7 – 275.00
    8×7 – 300.00
    9×7- 350.00
    9×8 – 375.00
    10×8 $400.00
    10×10 $450.00
All Steel NW Metal Roll-up Doors

Garage Roll-up Doors

  • Commercial Sizes:
    12×10 – $1,295.00
    12×12 – $1,495.00
    14×14 – $1,995.00
All Steel NW Metal Roll-up Doors

Non – Commercial Roll-up Doors

12×10 $795.00
12×12 $995.00

All Steel NW Metal Roll-up Doors

Over Head Roll-up Doors

Available from 8′ wide x 7′ height up to to 20′ wide x 14′ height

All Steel NW Metal J Trim

J Trim

Used to trim out windows and walk-in doors.

All Steel NW Metal L Trim

L Trim

Used to trim out roll-up doors and edges of sheet
panels for horizontal roofs/sides.

All Steel NW Metal Ridge cap Trim

Ridge cap Trim

Used for the peak of an A-frame Vertical where sheet panels meet.

All Steel NW Metal Boxed Eve

Boxed Eve

Used to cover truss overhang on A-frame styles where roof and side panels meet.